Knowing how to tune a car audio system to get the best out of your car stereo is essential. It’s one thing to have a combination of speakers, receivers, players, and amps. Still, you need to organize it to reproduce pleasant sounds. This will take some time and effort.
Due to poor setup, many car audio systems don’t sound as good as possible. This post will begin with the most basic car system consisting of a stereo receiver and four speakers. However, it is crucial to tune your car’s audio system when not driving.
What is tuning?
This is the first thing many people do after installing the audio system in their car. You can remove noise from your audio system through amplifiers, speakers, players, and subwoofers. However, to transform the noise into a musical sound is called tuning.
Tuning your car audio can enhance your musical experience. Your music will not sound good no matter how expensive your instruments are if it is not correctly tuned. There are several ways to tune your car’s audio system. Here are some expert car tuning tips for better music quality but first, know the basic terms.
Bass is a classification of frequencies ranging from 20Hz to 20,000Hz.
Treble refers to high-frequency sounds.
The subwoofer is a part of the speaker that produces bass frequencies.
The woofer is commonly installed in most cars and handles the middle frequencies.
Mids are broken into lower-mid, mids, and upper-mids. It is a classification of frequencies between 60Hz to 6,600Hz.
Highs are frequencies ranging from 6,600 Hz to 20,000 Hz.
The tweeter is a small speaker that can project high frequencies despite its small size.
Gain controls the volume of your sound system.
Make sure your car speakers are in phases
According to car experts, a well-tuned stereo creates the illusion that a band is right in front of you. If your car audio systems don’t have similar effects, the problem may be your car speakers. Usually, this occurs when the positive and the negative wire connecting your speakers don’t match.
Being out of phase means one speaker vibrates forward and another vibrates backward. The easiest detection for this issue is playing some music while turning the balance knob on your audio system to the left or right.
While paying attention to the sound of the music, move the knob to the center. If your bass is noticeably louder, it means your balance is centered. Your speakers are out of phase if there’s no difference when centered.
Use car stereo equalizer for clarity
To get the best experience when listening to music, the bass, mid and treble frequencies have to balance. If your music sounds far away or dampened, your mid-range is out of balance. You can add some boost to your mid-frequencies by using your car stereo equalizer. To preserve the sound stage, you can bring it up to the 400-1000Hz range.
You can also boost the drum cymbals to higher frequencies if it sounds muffled. However, it is worth mentioning that higher range frequencies don’t travel as far as low frequencies do. In this case, you may need to install discreet, detecting tweeters.
Get the right amount of bass
Turning the bass so high it vibrates the whole car isn’t going to bring out the best from your car audio system. Use your equalizers to turn down the low frequencies for the best bass output. If you have bass music, play it and slowly raise the bass level until the song sounds full and the sound stage is complete.
How to clean your speakers
It is vital to clean dust buildup in your car speaker. The muffled or unclear sound can often result from dust or grime build-up. The best approach is to use compressed air to blow away all unwanted particles.
Maintaining your car’s audio system can help it function optimally. If you have a tight budget to upgrade your car audio system, you are in luck. A DIY audio modification can significantly improve your car audio output without breaking the bank.
Get decent speakers
Your factory-installed speaker may be outdated. Some are made of lightweight materials that can cause distortion when listening to music. You should get good, high-quality speakers at an affordable price.
Upgrade your stereo
You may also need to get a new head unit to enjoy premium music quality. There are several smart stereos available at a reasonable price.
It’s vital to take caution when tuning your audio set. Bringing the bass all the way up will not give you a superb effect. The best thing to do is turn the treble and mid-tones down and increase the volume to the point you like and can appreciate the music.
A good amplifier can improve the overall quality of your audio output. It sends clear signals to the speakers, making the sound clearer and smoother.
Avoid poor audio files
Excessively compressed audio files can reduce the output quality of your music. It may sound okay when listened to using earbuds, but the output is usually poor on an audio system. So, avoid using excessively compressed audio files.
Adjust sound setting if your phone is connected
If you are playing music on your phone, the output is adjusted to your smartphone’s equalizer. You should also modify your audio system by adjusting the equalizer.
Sound deadening mats
For a continuous musical experience devoid of outside noise and distractions, use deadening mats. Sound deadening mats are cheap and can be placed strategically around your car to reduce external noise and the echo inside your vehicle.
Invest in a subwoofer
Most subwoofers come with an in-built amp. This can change your car-music experience. A subwoofer will make your audio output rich and crystal clear.
Now you know how to tune your car audio system and get the best output quality. Tuning takes your music experience to a whole new level. More so, it is a simple process that requires no technical skills. For more information, please contact us.